How you can Clear Codes From a Jeep Grand Cherokee 1Pop the hood on the Jeep Grand Cherokee by lifting the lever beneath the dashboard.2Release the lever under the front in the hood, and lift up the hood.
3Locate the battery. It's going to be on the passenger's side, straight behind the headlight.4Place an adjustable wrench about the bolt that may be securing the negative battery clamp.5Adjust the wrench until it fits tightly around the bolt.6Loosen the negative battery clamp Auto diagnostic tool, and get rid of it.7Hold the unfavorable battery clamp away from the battery and wait a single minute.8Place the unfavorable battery clamp back onto the unfavorable battery terminal.
9Tighten the clamp till it is securely on the unfavorable battery terminal again.10Start the Grand Cherokee.11Verify that the "Check Engine" light no longer is on.How you can Clear Code P0128 on a Pontiac 1Plug the OBD scan tool in to the diagnostic port discovered underneath the steering column on the Pontiac.2Put the important in to the ignition and turn it for the "On" position. Do not crank the engine.
3Wait for the scan tool to retrieve code P0128. Appear for the command "Delete Codes" or "Erase" on the face from the scan tool. Select this command. Wait for the main menu to return Auto diagnostic tools, or for the message "Command Sent" to appear on the menu. The code has now been cleared.4Unplug the scan tool and turn off the car.
Related articles:
没有评论:
发表评论