The best way to Connect an OBD2 for your Car or truck
1Determine irrespective of whether your vehicle is OBD2 compliant. A vehicle that is definitely OBD2 compliant will have a female 16-pin connector on the driver's side near the center console. Petrol autos manufactured as of 2001 and diesel cars manufactured as of 2004 need to have this connector.
2Prepare the equipment you'll need. Based on the type of OBD2 reader you'll be employing, you will need a private OBD2 code reader as well as a cable, or even a laptop with OBD2 computer software, a converter and connectors (see Resources below). For your safety, your car or truck engine has to be off when you connect your OBD2 reader.
3Locate the 16-pin connector. This connector will not be usually simple to obtain but it might be inside the car and not under the hood. Some areas where car makers install this connector include things like: beneath the steering wheel, the driver's foot well, the area among the driver and passenger seat Professional diagnositic tools, behind the ash tray, under the passenger seat, and more than the passenger door.
4Check the connector for the out there pins. The connector have to have pins four and 5 for grounding and pin 16 for energy supply from the battery. The other pins are present for the numerous protocols necessary for various automobile brands, like SAE J1850, ISO 9141-2, ISO 14230 and can bus.
5Connect your OBD2 code reader. Plug the end from the included cable using the 16-pin connector to the female 16-pin port, then connect the other end of your cable for the OBD2 reader.6Use your laptop computer as an OBD2 code reader. You can connect your computer for your car or truck with the use of a USB, RS-232C or Bluetooth connector. Furthermore to connectors Obd2 scanner, you will need the OBD2 software program to retrieve the information out of your auto and converters to modulate the voltage (see Resources below).
Related articles:
没有评论:
发表评论