Auto diagnostic tool Start&quot

Ways to Troubleshoot a Ford Automatic Transmission 1Park your Ford vehicle on a level surface. Begin your Ford and let it to idle for two to 3 minutes.2Open the hood of one's Ford and pull on the looped manage that sits behind the engine. The manage ends at a extended neck that stretches down towards the transmission. That is the transmission dipstick.3Remove the dipstick totally, wipe it off then reinsert it all the way into the filler neck till it bottoms out auto diagnostic software. Then remove it once more. Note the color. It ought to be reddish. If it is not, the transmission fluid could possibly be burned Auto diagnostic tool. Confirm this by smelling the fluid. If it smells burned, it truly is. You can want to alter your transmission fluid quickly to stop additional harm to your transmission. The fluid level need to also be in between the upper and decrease fill marks on the finish on the dipstick. If it is actually low, you require to fill the transmission with Ford-approved automatic transmission fluid.4Check for complications staying in gear although driving. If the vehicle slips out of gear whilst driving, this indicates a problem together with the transmission. You could possibly also hear grinding or crunching noises. This indicates that your transmission is seriously damaged and demands an overhaul.5Check for transmission complications employing an on-board diagnostic scan tool. This tool could be plugged into the OBD access port situated for the left in the fuse panel beneath the dash within the driver's side footwell. Press "Start" on the scan tool or wait for the tool to automatically retrieve the error codes. You could then have these codes translated utilizing your Ford's service manual or by most auto parts stores.