Vehicle Diagnostic equipment

How you can Retrieve the DTC From the Gem Module of a 1995 Ford 1Park the car on a flat surface and shift the car into 1st gear (should you have a common transmission) or park (if you have an automatic transmission) and turn off the engine.

Apply the parking brake and turn the ignition back for the "On" position without starting the engine.2Plug an automotive scan tool in to the vehicle's diagnostic data port. This port is mounted underneath the driver's side dashboard region.3Power on the scan tool and choose " Vehicle Diagnostic equipment;GEM" from the primary menu.

Decide on "Codes" from the GEM sub-menu. Then pick out, "Read all current and stored DTCs."4Write down the DTCs displayed on the scan tool's screen Professional diagnositic tools.