Auto diagnostics just loosen them so the dash panel comes out

The way to Hook an MT2500 to an HD2500 1Turn off the HD 2500, ensuring it really is in park along with the emergency brake is on. Unscrew the two significant, plastic screws for the underside left and suitable with the steering column. These screws are on the underside dash panel.

Leave the screws inside the dash, just loosen them so the dash panel comes out Auto diagnostics, exposing the significant cluster of wires running into a multi-plug unit Obd2 scanner.2Take the MT2500 cord-plug and align it towards the HD 2500 plug.3Push the two plugs with each other, making certain to align the rods on the MT2500 into the HD 2500 female receivers.4Turn on the MT2500 and make make certain the display screen comes on.

The way to Hook Up a Timing Light 1Lift and prop the hood when the vehicle engine is off.2Disconnect the vacuum line from the distributor and plug it with all the pencil tip. Make certain not to break the lead. Rest the pencil in a secure spot.3Grasp the red wire alligator clip on the timing light. Hook it to the positive battery terminal in the automobile.

4Locate the black wire on the timing light and attach it to the unfavorable battery terminal.5Connect the trigger clip, also known as the inductive pickup clamp, towards the initial spark plug wire. If there is an arrow on the clip, turn the clip inside the designated direction.6The timing light is now ready to make use of. Engage the help of a buddy or household member to acquire inside the automobile and begin the engine so you'll be able to use the timing light.