Obd2 scanner selection using the arrow keys on the scan tool. Decide on &quot

Tips on how to Reset the Fuel Program on a 1999 Jeep 1Park the Jeep on a flat surface and turn off the engine. Turn the ignition so that it clicks the moment, but does not commence the engine.

This can be the "run" position and it is going to illuminate the dashboard.2Locate the vehicle's diagnostic information port underneath the dashboard on the driver's side, above the pedal spot Obd2 scanner. Connect an automotive scan tool for the Jeep's diagnostic information port and turn on the scan tool diagnostics car tool.3Notice the main menu on the scan tool.

Select the "PCM" selection using the arrow keys on the scan tool. Decide on "Clear all existing and stored DTCs" from the PCM menu. Wait a moment when the scan tool clears the DTCs.4Unplug the scan tool from the car. Begin the engine and check to find out if the "Service Car Soon" light is on. If this light is turned off, the fuel method is reset.