Tips on how to Reset an Olds "Service Engine Soon" Light 1Open the fuse panel cover under the steering column by prying down on it with your fingers.2Locate the fuse for the electronic control unit, or ECU, using the fuse diagram on the underside of the fuse panel cover.
3Pull the fuse for the ECU using the fuse pullers mounted in the fuse panel.4Turn the ignition to the "II" position and wait five minutes before reinserting the fuse.5Wait for the "service engine soon" light to go out on the dash. Tips on how to Reset an SRS Light on an Acura MDX 1Open the fuse panel, and remove the fuse panel cover by pushing the release levers toward one another (on either side of your fuse panel cover) and pulling the cover down diagnostic car tool.
2Plug the electrical connector on the on-board diagnostic (OBD) reset tool into the fuse panel car diagnostic tool. There is only one electrical input port big adequate for the diagnostic tool.3Turn the ignition important to the "II" position, and wait for the SRS light to become reset.
Related articles:
没有评论:
发表评论